(m) Move engine clutch control lever (4) to disengage position.
(n) Remove safety pin (2. 1 ) and lockpin (2) from crane drive control lever(I).
(o) Move crane drive control lever (1) to ENGAGE position.
(p) Move engine clutch control lever (4) to engage position.
(q) Move throttle control lever (3) forward to engaged position.
(r) Lower hoist block (5) and remove boom hook tiedown sling (6).
Check engine rpm. It should stabilize at 1250 ± 50 rpm. Excessive
rpm will cause damage to vehicle.
Engine speed will automatically adjust to 1250 ± 50 rpm by
When lifting heavy loads, shipper braces must be adjusted for lift
height. Equipment failure can result in injury or death.
2-152 Change 1