(e) Remove lockpins (4) from jack pin (3).
(f) Remove boom jacks (2) from jack pin (3) and remove jack pin (3).
(f.1) Stow base plates (2.1) on rear winch.
Shipper braces must be
positioned in place to support
crane boom when vehicle is
traveling to prevent damage to
(i) Remove clips (11) securing
shipper braces (12) to boom (1).
(g) Insert handle (9) in outrigger
collar (6) and turn until outrigger base (8)
rises off ground its full length of travel.
(h) Remove L-shaped pin (10) from
frame (5), swing outrigger base (8) up, slide
outrigger shaft (7) into frame (5) all the way,
and secure in place with L-shaped pin (10).
2-160 Change 1