(q) Move throttle control lever (3) rearward all the way.
(r) Move engine clutch control lever (2) to disengage position.
(s) Ensure crane drive control lever (1) is in DISENGAGE position.
(t) Install lockpin (4) in crane drive control lever (1) to lock in place.
(u) Move power divider control lever (6) up until lock (7) snaps in place.
(v) Depress and release service brake pedal (5) to disengage electric brake lock.
(w) Ensure main floodlight switch (8) is in OFF position.
(x) Depress clutch pedal (13).
(y) Place transfer selector lever (11) in LOW or HIGH range, depending upon
(z) Shut down engine (refer to paragraph 2-16).
2-162 Change 1