Do not raise block (1) too high to prevent jamming inside boom (2).
Damage to boom and block can result.
(n) Move hoist lever (10) to UP position to raise load (8).
Before swinging load right or left, make sure load path is clear of
obstructions to prevent damage to vehicle and/or injury to
(o) Remove L-shaped pins (5) securing shipper braces (3).
(p) Swing braces (3) up to brackets (4). Adjust brace length by moving L-shaped
pin (6) to next higher or lower hole. Secure braces (3) to bracket (4) with L-shaped
(q) Move swing lever (12) to LEFT position to swing load (8) left, and move lever
(12) to RIGHT to swing load right.
(r) Move hoist lever (10) to UP position and move crowd lever (11 ) to EXTEND
position at same time to move load (8) out.
(s) Move hoist lever (10) to DOWN position to lower load (8).
Before removing hook from lifting device, block load to prevent
tipping or shifting. A falling or shifting load can cause injury to
(t) Remove hook (9) from lifting device (7).
(u) Move hoist lever (10) to UP position and raise hook (9).