(5) Remove forward side rack (3).
(4) Park second truck with winch (1) in position.
Always wear hand protection when handling winch cable. Never
let cable run through bare hands. Broken and frayed wires can
(7) Pull latch (5) down, swing bracket (6) to open position, and place winch cable (2)
on sheave (7).
(8) Swing bracket (6) to closed position and pull latch (5) into locked position.
Do not let personnel stand or walk under or near loads and
winch cables being used to load and unload truck. A snapped
cable or shifting load can cause serious injury.
Do not lift or pull more than the rating of the winch being used.
to avoid damage to equipment or injury to personnel.
Position load in truck body so that weight is spread evenly over
the whole body so as not to unbalance the truck.