e. Check cable-to-clamp connections (12) and clamp-to-post connections (11) for
tightness. If connections require tightening. notify organizational maintenance.
f. Push battery boxes (9) in place and position handles (5) in support tabs (7)
g. Secure handles (5) with retainer pins (6).
h. Install running board assembly (3) and secure with battery cover latches (4).
3-14. OIL RESERVOIR BREATHER CAP SERVICE (M819)
Drycleaning solvent is flammable. Do not use near an open flame.
Keep a fire extinguisher nearby when solvent is used. Use only in
well-ventilated work place. Failure to do this can result in injury to
personnel and damage to equipment.
a. Pull breather cap (14) from pipe (13).
b. Clean cap (14) with solvent. AlloW to dry.
c. Install cap (14) on pipe (13). Make sure cap (14) is well-seated on pipe (13).