2-4. BODY EQUIPMENT CONTROLS AND INDICATORS (Contd)
Item and Function
HINGED ROOF PANEL is supported by swivel hooks (21) and toggle clamps (22).
END PANEL is hinged to van side (20) and secured to corner post (13) by sliding bolt (19).
BALANCE MECHANISM evenly controls lowering and raising of hinged floor (17) and roof panel (10).
CORNER POST provides brace for expanded van sides (20).
HEATERS in front of van provide heat.
BONNET DOOR CONTROL HANDLE is pushed forward to open bonnet door before operating air conditioner.
Handle is pulled back to close bonnet door after air conditioner has been shut off.
HEAT REGISTERS are in use when van heaters (14) are operating. Registers must be closed when van heaters
(14) are not in use.
FLOOR is hinged for up and down movement.
LATCH on van corner post (13) holds sliding bolt (19) in correct position.
SLIDING BOLT aligns end panel (11) with van corner post (13).
EXPANDED VAN SIDE is secured to hinged roof panel (10) by swivel hooks (21) and toggle clamps (22).
SWIVEL HOOKS are swung sideways to support hinged roof panel (10) when van sides (20) are expanded.
TOGGLE CLAMP locks with swivel hook (21) to secure hinged roof panel (10) to van side (20).