TOWING WITH TOWBAR (Contd) I
Install yoke (12) end of towbar (7) to pintle hook (13) of towing vehicle.
Loosely install a utility chain (9) through front springs (8) of disabled vehicle and around frame (11) of
towing vehicle. Make sure utility chain (9) is clear of any light brackets or wiring.
If vehicle being towed has inoperative compressed air system, emergency
air and service air lines must not be connected between vehicles. Failure
to do this may result in damage to equipment, or cause injury or death.
Connect emergency air line (15) and service air line (17) to half couplings (14) and (16) on each vehicle.
Release parking brake (20) and place transmission selector lever (18), transfer case shift lever (19), and
power takeoff lever (21) in neutral on disabled vehicle.
Turn on hazard warning lights on both towing and disabled vehicles