TM 9-2320-272-10
3-11. WHEELS AND TIRES (Contd)
(3)
Removal (M929/A1/A2, M930/A1/A2, and M934).
NOTE
This procedure requires two personnel.
(a)
Obtain utility chain (1) and chain fall (4) from tool compartment.
(b)
Secure utility chain (1) around spare tire (6) and take up slack.
(c)
Hook chain fall (4) through support loop (3) and to utility chain (1), securing spare tire (6) with ring (2)
and take up slack.
(d)
Loosen wingnut (9) securing wheel brace (10) to threaded bar (8).
(e)
Pull wheel brace (10) and threaded bar (8) from spare tire (6).
WARNING
Keep spare tire from swinging. Injury may occur if personnel are struck by a swinging spare tire.
Use caution when operating chain fall. Fingers may be caught in chain fall pulley sheave causing
injury.
3-34