RADIATOR FAN CLUTCH EMERGENCY SERVICE (Contd)
Raise and secure hood (paragraph 2-19).
Remove two clutch override lockup bolts (6) from storage boss on fan clutch support bracket (5).
Because fan clutch assembly is a moving part when engine is running, alignment mark may be located in
different position from position shown in illustration. Without starting engine, tap engine ignition switch to
move alignment mark to proper position.
Line up alignment mark on side of fan mounting plate (8) with alignment mark on side of fan clutch assembly
(7). Fan mounting plate (8) turns freely by hand.
With alignment marks lined up, insert two clutch override lockup bolts (6) into holes of fan mounting plate (8)
Tighten override lockup bolts (6) until fully seated to secure fan mounting plate (8) to fan clutch assembly (7).
Close and secure hood (para. 2-19).
Start engine and allow engine to cool at idle speed until engine coolant temperature drops to normal
operating temperature range of 1750-195°F (79°-910C).
Make certain unit maintenance is notified of emergency service performed on vehicle.