2-3. CHASSIS CONTROLS AND INDICATORS (Contd)
Item and Function
TURN SIGNAL CONTROL LEVER is moved down to operate vehicle left turn signals and up to operate right turn
signals. Lever must be returned to the center position to turn off signal. Turn signal control is equipped with
hazard tab button.
HORN BUTTON is pressed to operate vehicle horn.
SPRING BRAKE OVERRIDE held in during self-recovery of M936/AVA2 model vehicles with rear winch.
FUEL LEVEL GAUGE SWITCH (M929/A1/A2, M930/A1/A2, M931/A1/A2, M932/AVA2, and M936/A1/A2 models)
permits reading fuel level on the fuel gauge for each fuel tank when turned L (left) or R (right).
FRONT WHEEL DRIVE LOCK-IN SWITCH allows operator to engage front wheel drive and is used only when
vehicle transfer case is in high range. In low range, the vehicles front wheel drive engages automatically. Vehicle
may be in motion or stopped to engage front wheel drive lock-in switch.
LIGHT SWITCH controls operation of vehicle lights.
ETHER START SWITCH injects ether into engine for cold weather starting.
INSTRUMENT PANEL LIGHTS illuminate instrument panel gauges.
TRANSMISSION POWER TAKEOFF CONTROL LEVER (M925/A1/A2, M928/A1/A2, M929/A1/A2, M930/A1/A2,
M932/A1A2, and M936/A1/A2 models) engages transmission power takeoff to provide power for auxiliary
FRONT WINCH CONTROL LEVER (M925/A1/A2, M928/A1/A2, M930/A1/A2, M932/A1/A2, and M936/A1/A2
models) is pulled back to wind front winch, and forward to unwind for lowering loads during A-frame operation.
AUTOMATIC TRANSMISSION SELECTOR LEVER is used to select vehicle driving gear.