1-20. 15K SELF-RECOVERY WINCH (SRW) (CONT)
Figure 1-25. 15K Self-Recovery Winch (SRW) (Cont)
(1) Hydraulic pressure to operate the 15K SRW is supplied by a three stage hydraulic
pump (2) on model M1089 and a single stage hydraulic pump (3) for all other models.
The hydraulic pump is mounted on the back of the PTO (4).
(2) Placing the PTO switch (5) in the ON position causes the PTO drive gear to engage
with the transmission. When the PTO is engaged, it drives the hydraulic pump.
(3) When the 15K SRW switch (6) is turned on, hydraulic power is supplied to the 15K
SRW and the transmission is locked in Neutral.
(4) The cable can be payed out or reeled in by pressing the WINCH IN/OUT switch (7).