TM 9-2320-260-10
KEY
1
2
3
4
5
6
7
8
9
ITEM AND FUNCTION
Cowl ventilator control handle, when pushed forward, opens cowl ventilator to .
let air into cab; when pulled back, closes cowl ventilator.
Transmission gearshift lever is used to place transmission in 1 through 5 drive
positions, reverse. or neutral,
Transfer selector lever is used to change gears. Lever is pulled up to “High” for
light load conditions. down for “Low” and heavy load conditions.
Front winch control lever is pulled back to wind front winch and pushed forward
to unwind.
Parking brake control lever is pulled up to apply parking brake. Knob at end of
handle can be turned to adjust brake cable tension.
Power divider control lever is pushed forward to provide power for auxiliary
equipment.
Transfer power takeoff control lever is pulled up to provide power for auxiliary
equipment (M816).
Accelerator pedal controls engine speed. When pushed down with foot, engine
speed increases. When foot pressure is released. engine speed is reduced.
Headlight beam selector switch is depressed to select “high” or “low” headlight
beam.
2-6 Change 1
