TM 9-2320-260-10
Table 2-2. Operator/Crew Preventive Maintenance Checks and Services (Cont’d)
NOTE: These checks are to be made in the order listed, within designated interval.
B-Bofore operation D-During operation
A-After operation W-Weeklv M-Monthly
ITEM
NO.
SURGE TANK
2-46
INTERVAL
ITEM TO BE INSPECTED
PROCEDURE: Check for and
have repaired, filled, or
adjusted as needed
ENGINE COMPARTMENT
WARNING
Extreme care should be taken when
removing surge tank filler cap if
temperature gage reads above 175F
(79C). Steam or hot coolant under
pressure can causs injury.
should be tilled to approximately bottom end of fill
tube before operation. Add coolant as required.
b. Check l ll hoses for deterioration, leakage, and
secure connections.
ENGINE OIL LEVEL (Hot or Cold)
CAUTION
Do not overfill.
Slowly remove dipstick (1) l nd check for proper oil
level. Level should be between L (low) and H (high]
marks. Add oil as necessary.
EQUIPMENT IS
NOT READY/
AVAILABLE IF:
Class III leak is evident.
Class III leak is evident.
TA 09426
