TM 9-2320-272-10
2-22.
OPERATION OF FRONT WINCH (Contd)
(d)
On winches with level wind device, manually push level wind (12) completely to the operator’s side of
level wind (12) frame. Pull out level wind lock knob (13), rotate 90 degrees, and release. If necessary, adjust level wind
(12) to assure lock plunger engages.
(6)
Push transmission power takeoff control lever (1) forward to DISENGAGE.
h.
Preparing Winch for Travel.
(1)
On winches without level wind:
(a)
Put cable chain (8) under and over right frame extension, then across top of bumper. Attach cable hook
(7) to left lifting shackle (6).
(b)
Remove right lifting shackle (11) by unsnapping pin lock (9) and removing shackle bolt (10). Place chain
(8) through lifting shackle (6) and reinstall shackle (11).
(2)
On winches with level wind:
(a)
Pull cable chain (16) up through the space between bumper and winch.
(b)
Wind cable chain (16) around level wind (12) frame and attach hook (7) to frame.
(c)
Pull out cable tensioner lock knob (15) with left hand and push tensioner lever (14) toward left of vehicle
with right hand. Release lock knob (15).
2-123
