TM 9-2320-272-10
2-24.
OPERATION OF MEDIUM WRECKER (Contd)
WARNING
Do not operate winch erratically. Erratic winding may result in a snapped cable, causing injury or death.
(c)
Push directional control lever (1) into
WIND.
(19) To shift torque control lever (2) from LOW
to HIGH or HIGH to LOW:
(a)
Pull directional control lever (1) out to
NEUTRAL.
(b)
Shift torque control lever (2).
(c)
Push directional control
lever (1) in
to resume winding.
(20) Place
directional
control
lever
(1)
in
NEUTRAL to stop winding.
(21) Briefly pull directional control lever (1)
outward to UNWIND to loosen cable for unrigging.
(22) Remove winch cable chain t 7) and hook (9) from load. Remove snatch blocks if used.
(23) Push directional control lever (1) in to WIND. Release directional control lever (1) to stop winding operation
when cable chain (7) approaches guide rollers (4).
2-132
