TM 9-2320-272-10
2-27.
OPERATION OF EXPANSIBLE VAN TRUCK (Contd)
(22) Remove ground spike (9) and store in storage
location (14).
(23) Remove two jack spikes (22) from footpad (21) and
install jack handle (19) in leveling jack (20). Rotate jack handle (19)
clockwise until footpad (21) clears ground.
(24) Remove leveling jack (20) from van body bracket
(18) and detach footpad (21) from jack (20).
(25) Remove leveling jack eyebolt (23) and telescope
leveling jack (20). Reinsert eyebolt (23).
(26) Repeat steps 23 through
25 with three remaining van body leveling
jacks (20).
(27) Stow two leveling jacks
(20), footpads (21), and jack spikes (22) in
compartment at rear of van body.
(28) Stow all tools and equipment used in
van operation.
(29) Close and secure rear doors.
(30) Install ladders (24) to rear doors (26)
and secure for travel with toggle clamps (25).
(31) Start with van end of auxiliary power
cable (28) and, using handle (29), wind up power cable
(28) on reel (27).
2-171
