TM 9-2320-272-10
3-15.
ENGINE SPLASH SHIELD REMOVAL
a.
General. Splash shields are removed to
gain access to the engine.
NOTE
Removal or installation of left and right
engine splash shields is the same.
b.
Removal.
(1)
Raise and secure hood (para. 2-19).
(2)
Lift engine splash shield (1) out of two
brackets (2).
c.
Installation.
(1)
Guide engine splash shield (1) ends
into two brackets (2) and push down splash shield (1)
until it touches bottom of brackets (2).
(2)
Close and secure hood (para. 2-19).
3-16.
CTIS DISABLE AND RESET
a.
General. Central Tire Inflation’ System
(CTIS) is a completely automatic system with the
capability for operator to select several different modes
of operation. When system malfunction can not be
resolved by switching modes, it may be necessary to
disable the Electronic Control Unit (ECU).
b.
Disable ECU.
(1)
Ensure engine is not running and
battery switch is turned off (para. 2-16).
(2)
Turn cable connector (3) clockwise
one quarter turn and remove from connector (4) of ECU
(5).
c.
Reset ECU.
(1)
Ensure engine is not running and
battery switch is turned off (para. 2-16).
(2)
Connect
cable
connector
(3)
to
connector (4) of ECU (5) and turn counterclockwise one-
quarter turn.
(3)
Start engine (para. 2-12) and check
system for proper operation (para. 2-14).
3-60
