TM 9-2320-366-10-1
2-2. AUXILIARY PANEL CONTROLS AND INDICATORS
a. Auxiliary Panel Controls and Indicators for M1083, M1084, M1085, M1086, M1088,
M1089, and M1093. Figure 2-6 shows all controls and indicators that may be located on
the auxiliary panel. Some switch locations may be blank, depending on the model of your
vehicle.
Figure 2-6. Auxiliary Panel Controls and Indicators for M1083, M1084,
M1085, M1086, M1088, M1089, and M1093
1. TACH (Tachometer) (Models with Power Take-Off [PTO]).
Shows speed of
engine crankshaft in revolutions per minute (rpm x 100). Tachometer is used to
monitor engine speed for PTO operation.
2. Winch Switch (Models with 15K Self-Recovery Winch [SRW]).
Locks
transmission in Neutral for self-recovery operation.
3. WINCH IN/OUT Switch (Models with 15K Self-Recovery Winch [SRW]).
Controls reel in/pay out of cable. PTO switch must be positioned to on before
WINCH IN/OUT switch will operate. Push top half of switch to pay out cable,
bottom half of switch to reel in cable.
4. PTO Switch (Models with PTO). Controls operation of PTO.
2-13
