TM 9-2320-366-10-1
Table 2-1. Preventive Maintenance Checks and Services (All Models) (Cont)
Location
Item
No.
Interval
Item to
Check/
Service
Crewmember
Procedure
Not Fully
Mission Capable
If:
WARNING
Engine dipstick is located close to starter solenoid connectors
which contain 24 vdc and high amperage. Use caution
removing/installing engine dipstick to prevent shorting across
starter solenoids when checking engine oil level. Failure to comply
may result in serious injury or death to personnel or damage to
equipment.
CAUTION
Do not overfill engine with oil. Failure to comply may result in damage
to equipment.
34
After
Engine Oil
a. Check engine oil dip-
stick for oil level. Level
should be between
ADD line and FULL
line.
b. Add oil as required
(Appendix F).
c. Lower cab (para 2-
28b).
If engine oil is
over FULL line,
discolored, or
milky, Notify Unit
Maintenance.
Change 1
2-75
