TM 9-2320-366-10-1
2-35. M1090/M1094 DUMP COVER KIT INSTALLATION/
REMOVAL (CONT)
NOTE
• Right and left side flaps are raised and lowered the same way.
• There are six straps and six sets of D-rings attached to cover for holding
side flaps in open position.
(2) Remove shock cord (3) from J-hooks (4).
NOTE
Steps (3) through (6) are performed from inside dump body.
(3) Roll up side flaps (5).
(4) Wrap strap (1) around side flaps (5).
(5) Install strap (6) through D-ring (7).
(6) Adjust length of strap (1) as required.
(7) Perform steps (4) through (6) on remaining five straps.
2-342
