TM 9-2320-366-10-1
2-37. M1084/M1086 MATERIAL HANDLING CRANE (MHC)
OPERATION (CONT)
b. Prepare MHC for Use.
WARNING
• Operator must keep load in sight at all times while operating Material
Handling Crane (MHC). Load may unexpectedly shift. Failure to comply
may result in serious injury or death to personnel.
• Do not operate Material Handling Crane (MHC) and 15K Self-Recovery
Winch (SRW) at the same time. Failure to comply may result in serious
injury or death to personnel.
• Wheels must always be chocked before operating Material Handling
Crane (MHC). Vehicle may move or load may shift. Failure to comply
may result in serious injury to personnel or damage to equipment.
• Goggles must be worn while operating Material Handling Crane (MHC)
controls. Blowing dust and debris may become airborne while engine
is running. Failure to comply may result in injury to personnel.
NOTE
MHC will not operate unless outriggers are lowered.
(1) Start engine (para 2-27a or b).
NOTE
MHC can operate on a side slope of up to 5 degrees.
(2) Position vehicle on level ground so all loading and unloading can be done from one
position.
(3) Chock wheels (para 2-27h).
2-358
Change 1
