2-37. M1084/M1086 MATERIAL HANDLING CRANE (MHC)
Do not raise vehicle tires off ground with outriggers. Vehicle may roll
over. Failure to comply may result in serious injury or death to
personnel or damage to equipment.
Outriggers must be positioned so that Material Handling Crane (MHC)
is level from side to side. Use of MHC when vehicle is not level can
cause vehicle to roll over. Failure to comply may result in serious
injury or death to personnel.
Operate LH O/R JACK lever and RH O/R JACK lever at the same time.
Outriggers should be lowered just enough so that all tires have firm contact
with ground but do not bulge from weight. Left outrigger or right outrigger
may need to be lowered slightly more than the other to level MHC from side
(8) Position LH O/R JACK lever (7) and RH O/R JACK lever (8) to DOWN until vehicle
weight is off rear tires.