2-37. M1084/M1086 MATERIAL HANDLING CRANE (MHC)
There should be no movement of MHC during this check. If there
is movement in MHC, notify Unit Maintenance.
(c) Continue holding HOIST lever (1) in UP position while positioning TELESCOPE
lever (16) to OUT and BOOM lever (7) first to UP and then to DOWN.
Approximately six seconds should elapse before overload
shutdown system resets and boom responds to down movement.
If no movement occurs, notify Unit Maintenance.
(d) While holding BOOM lever (7) in the DOWN position, pay out hook assembly (3)
so no contact is made with boom nose (15).
(e) Press MANUAL OVERRIDE switch (17) to reset.