TM 9-2320-260-10
2-21. INSTALLING CAB TOP AND RAISING WINDSHIELD
NOTE
This operation is best accomplished by the operator and one crew-
member.
a. Release windshield catches (3) and
raise windshield (1) to vertical position.
b. Tighten knobs (4) on left and right
sides of windshield (1) frame.
c. Secure windshield catches (3) to hood
(2) mounts.
d. Lower cab windows.
e. Install one pillar post (7) in rear corner
of cab (12). Position roof rail (6) to
windshield (1) frame and push roof rail
catch (5) into windshield (1) to lock catch
(5).
f. Insert crossbows (9) and (11) over roof
rail bows (8) of installed pillar post (7).
Make sure crossbow (9) with stave holes is
on top roof rail bow (8).
TA 094309
2-94
