TM 9-2320-240-10
(2)
(3)
(4)
(5)
Sudden tightening of loose cable can cause injury.
Move engine clutch control lever (8) to DISENGAGE position.
Remove lockpin (9).
Move rear winch shift lever (6) to WIND position.
Move engine clutch control lever (8) to ENGAGE position,
(5.1) Take up slack. stop winch (refer to g. below), and recheck rigging.
(5.2) Perform steps 1 through 3 above.
(6) Move throttle control lever (7) forward to increase, or rearward to decrease
speed of winch rewind operation.
(7) Stop winch (refer to g. below).
TA 094338
2-124 Change 1
