TM 9-2320-260-10
(a) Start engine (refer to paragraphs
2-12 or 2-13).
(b) Place transfer selector lever (15)
in “N” (neutral).
WARNING
Direct all personnel to
stand clear of vehicle when
engaging transmission or
transfer. Failure to do this
can result in injury or death.
(c) With parking brake applied, and
clutch pedal (19) depressed, place trans-
mission gearshift lever (14) in “N” (neutral).
(h) To lower power liftgate (8),
remove lever extension from cab stowage
(d) Move transmission power takeoff
lever (16) forward to engage position.
(e) Slowly release clutch pedal (19).
(f) Pull out hand throttle control (17)
and set engine idle speed at 1000 to 1200
rpm as indicated by tachometer (18).
(g) To open power liftgate (8), move
opening and closing control lever (12)
toward rear of vehicle. Liftgate will stop
automatically when fully open.
and install on lowering and elevating control
lever (13) at van rear. Move lever (13)
momentarily toward front of vehicle to
release safety lock, then toward rear of
vehicle. Liftgate will stop automatically at
ground level.
(3) Depress clutch pedal (19) and move
transmission power takeoff lever (16) back
to disengage position.
(4) Stop engine (refer to paragraph
2-16).
2-175
