TM 9-2320-260-10
1. Removal.
(a) Hold spare wheel (6) in place while removing nuts (8).
(b) Remove spare wheel (6) from studs (7).
2. Replacement.
(a) Position spare wheel (6) on studs (7).
(b) Hold spare wheel (6) in place and secure with nuts (8).
g. Spare Wheel Removal and Replacement (M821).
1. Removal.
(a) Loosen nuts (10) and turn spare wheel (6) so studs (12) pass through slots (11)
n spare wheel carrier frame (9).
(b) Turn shaft (13) left and lower wheel (6) to ground.
(c) Remove nuts (10) and plate (15) from wheel (6).
2. Replacement.
(a) Position plate (15) and studs (12) on wheel (6).
(b) Install nuts (10) halfway onto studs (12).
(c) Turn shaft (13) right until wheel rim (2) is raised in place against rack (14).
(d) Turn spare wheel (6) so nuts (10) and studs (12) pass through holes in spare
wheel carrier frame (9).
(e) Turn wheel (6) right so studs (12) pass through slots (11).
(f) Tighten nuts (10).
TA 094474
3-23
