TM 9-2320-260-10
(b) Remove tire bolts (7).
(c) Remove spare wheel (1) from
spare wheel carrier (6).
2. Replacement.
(a) Position spare wheel (1) in spare
wheel carrier (6).
(b) Place tire bolts (7) through holes in spare wheel (1) and spare wheel carrier (6),
and secure with spring (12), two washers (8) and (11), and two nuts (9) and (10).
d. Spare Wheel Removal and Replacement (M819).
1. Removal.
NOTE
When installing spare wheel on converted M819 tractor wrecker,
locating pin in front hub must aline with hole in rim.
(a) Remove two nuts (15) and hold spare wheel (1) in place while removing third
nut (14).
(b) Remove spare wheel (1) from carrier studs (13).
2. Replacement.
(a) Lift spare wheel (1) into position on carrier studs (13).
(b) Hold wheel (1) in place while securing with nuts (14) and (15).
TA 094472
3-21
