TM 9-2320-366-10-1
Table 2-3. Preventive Maintenance Checks and Services (M1084 and M1086) (Cont)
Location
Item
No.
Interval
Item to
Check/
Service
Crewmember
Procedure
Not Fully
Mission Capable
If:
CAUTION
Keep hook block at least 2 ft (0.6 m) from end of boom. If hook block
hits end of boom, Material Handling Crane (MHC) will lose power for
several seconds.
Failure to comply may result in damage to
equipment.
3
During
MHC
Remote
Controls
(Cont)
h. Place TELESCOPE
lever in OUT position
and HOIST lever in
DOWN position to
extend boom.
h. Boom does
not extend or
cable does not
pay out.
i.
Place TELESCOPE
lever to IN position and
HOIST lever in UP
position to retract
boom.
i.
Boom does
not retract or
hoist does not
reel in cable.
j.
Place BOOM lever in
UP position to increase
boom angle.
j.
Boom angle
does not
increase.
Change 1
2-141
