TM 9-2320-366-10-1
f. Rotate and Telescope Boom.
WARNING
• Keep boom clear of all electrical lines and other obstacles while
operating Material Handling Crane (MHC). Failure to comply may result
in serious injury or death to personnel.
• Area must be clear of personnel before operating swing or telescoping
boom. Boom must be rotated and telescoped slow enough so Operator
has control of load. If Operator cannot see load during operation,
operate Material Handling Crane (MHC) with REMOTE CONTROL UNIT.
Failure to comply may result in serious injury or death to personnel.
NOTE
• Operate MHC control levers using even pressure. Moving lever slightly will
cause slow movement of MHC. Moving lever to full travel will cause faster
movement of MHC.
(1) Position SWING lever (1) to CW to move boom (2) to the right.
(2) Position SWING lever (1) to CCW to move boom (2) to the left.
2-369
