TM 9-2320-260-10
(4) Lift and remove front rack (2).
NOTE
This operation requires two
crewmembers.
(5) Lift and remove side racks (1).
e. Installing Front and Side Racks.
(1) Reverse procedures (1) through (5)
in d.
(2) When installing front rack (2), be
sure front rack retainer clip (3) is inserted in
side rack rings (4).
f. Lowering and Raising Dropsides.
(1) Park vehicle where it can best be
loaded or unloaded. Turn ignition switch
and battery switch levers to OFF and apply
parking brake.
(2) Turn locking handle (6) counterclockwise to loosen. Grasp ring (8) and twist to
turn T-bolt (7) in vertical up position. Remove locking handle (6) and repeat operation
on opposite end of dropside.
WARNING
Make sure troop seat securing pins (5) are engaged before lowering
dropside to prevent injury.
NOTE
This operation requires two
crewmembers.
(3) Grasp side rack (1) and carefully
lower dropside.
TA 094318
2-104
