TM 9-2320-260-10
(j) TO swing load left, move swing lever (13) to LEFT position.
(k) To swing load right, move swing lever (13) to RIGHT position.
(l) Move hoist control lever (11) to DOWN position to lower load (7) to ground.
WARNING
Before removing hook from lifting device, block load to prevent
tipping or shifting. A falling or shifting load can cause injury to
personnel.
(m) Remove hook (6) from load (7) and move hoist control lever (11 ) to UP
position to raise hook (6).
(4) Heavy Rear Lifting.
(a) Remove base plates (16) from rear winch
(b) Move hoist control lever (11) to DOWN position and crowd control lever (12)
to EXTEND position to extend boom (5) to the 15-foot mark.
(c) Remove lockpins (14) from inner jackpin (15).
(d) Install inner jack pin (15) at 13-foot mark on boom (5).
2-157
