TM 9-2320-272-10
2-15. PLACING VEHICLE IN MOTION (Contd)
CAUTION
l Do not shift transfer case shift
lever when transmission is in
gear. Transmission selector
lever must be in N (neutral)
before shifting transfer case
shift lever from high range to
low range, or low range to high
range.
l Never shift transfer case shift
lever from high range to low
range until vehicle is slowed
down to 22 mph (35 km/h) or
less.
j .
Shift transfer case shift lever (4) as required by vehicle speed and changes in
driving conditions.
(1)
To shift transfer case shift lever (4) from high range
to low range when vehicle is in motion:
(a)
Slow vehicle to 22 mph (35 km/h) or less as
indicated by speedometer (1).
(b) Shift transmission selector lever (3) to N
(neutral) (9).
NOTE
If gears do not mesh smoothly, return
transfer case shift lever to neutral and
attempt to re-engage low range.
(c)
Press lockout switch (6) with thumb and shift
transfer case shift lever (4) from high range to low range.
(d) Release transfer case shift lever (4) and shift
transmission selector lever (3) into 1-5 (drive) (10) position.
(2) To shift transfer case shift lever (4) from low range to high range when
vehicle is in motion:
(a) Shift transmission selector lever (3) to N (neutral) (9).
(b)
Press lockout switch (6) and shift transfer case shift lever (4) to high.
(c)
Release transfer case shift lever (4) and shift transmission selector
lever (3) into 1-5 (drive) (10).
k.
Apply brake pedal (8) as needed when going down a grade.
2-106
*U.S. GOVERNMENT PRINTING OFFICE:1999-746-025/80170
