TM 9-2320-272-10
2-29.
PREPARATION FOR SHIPMENT (Contd)
h.
Minimum Reducible Width.
(1)
Shipping width is measured at the widest point on the vehicle excluding mirrors. On the M939, M939A1,
and M939A2 series vehicles, it may be necessary to retract mirrors to obtain necessary clearance.
(2)
Retracting mirrors.
(a)
On left side of vehicle, loosen locknut (3) from screw (4).
(b)
Rotate outer brace (2) inward toward door (1) until outer brace (2) no longer extends beyond
fender (5).
(c)
Tighten locknut (3) on screw (4) to secure outer brace (2) in this position.
(d)
Repeat steps a through c for right side of vehicle.
CAUTION
With rear view mirrors retracted, use additional spotters when moving vehicle. Failure to
do so may result in damage to equipment.
(3)
Extending mirrors.
(a)
On left side of vehicle, loosen locknut (3) from screw (4).
(b)
Rotate outer brace (2) outward from the door (1) until extends it beyond fender.
(c)
Adjust as necessary to obtain
unobstructed rear view.
(d)
Tighten locknut (3) on screw (4)
while holding outer brace (2) in place.
(e)
Repeat steps a through d for
right side of vehicle.
2-200
