TM 9-2320-366-10-1
Table 2-3. Preventive Maintenance Checks and Services (M1084 and M1086) (Cont)
Location
Item
No.
Interval
Item to
Check/
Service
Crewmember
Procedure
Not Fully
Mission Capable
If:
WARNING
Keep hands and feet clear of outriggers during operation. Failure
to comply may result in injury to personnel.
NOTE
Position outrigger pads as required so that ends of outriggers lower
to outrigger pad sockets.
2
During
MHC
Operation
a. Prepare MHC for use
(para 2-37b).
b. Set up outrigger pads
(para 2-37c).
c. Check that two pins are
attached to each pad.
d. Place LH and RH O/R
JACK lever in down
position until outrigger
lowers to ground.
c. Pin(s) are
damaged or
missing.
d. Outrigger
cylinder will
not lower
completely to
ground.
2-132
