TM 9-2320-366-10-1
2-27. VEHICLE OPERATION (CONT)
CAUTION
• Engine rpm must be at idle (750 rpm) prior to selecting any forward or
reverse gear. Failure to comply may result in damage to equipment.
• Do not allow vehicle to coast in N (Neutral). Failure to comply may result in
damage to equipment.
NOTE
When transmission is operating normally, left side of display window will
indicate selected gear and right side of display window will indicate
current operating gear.
(2) Select desired travel direction (D for Drive or R for Reverse) on WTEC II TEPSS (1)
or WTEC III TPSS (1).
2-232
