TM 9-2320-366-10-1
2-27. VEHICLE OPERATION (CONT)
CAUTION
If illumination of last selected gear (in left side of LED display) goes out,
WTEC II Transmission ECU Pushbutton Shift Selector (TEPSS) or WTEC
III Transmission Shift Selector (TPSS) has detected a problem that needs
correcting. Do not attempt to shift transmission to N (Neutral) or any
other gear. Operate vehicle at reduced speed to a safe parking location.
Failure to comply may result in damage to equipment.
NOTE
Perform steps (4) through (7) if left side of LED display is not showing a
selected gear.
(4) Stop vehicle (para 2-27d).
(5) Position master power switch (5) to off.
(6) Pull out SYSTEM PARK control (2).
(7) Notify Unit Maintenance.
2-234
