TM 9-2320-260-10
(k) Use outrigger handle (4) to turn collar (3) to lift base plate (5) from ground.
(l) Remove L-shaped pin (2) from end frame (1).
(m) Swing outrigger (6) up and slide into vehicle end frame (1).
NOTE
• Repeat steps (k) through (m) for opposite rear outrigger and
forward outriggers.
• Steps (n) and (o) are required for rear outrigger only.
(n) Remove lockpin (9) and retaining
pin (8). Remove base plate (5).
(o) Install L-shaped pin (2) in
outrigger (7).
(p) Move boom lever (10) to DOWN
position to lower boom (13) all the way.
2-168
