TM 9-2320-260-10
e. Tie Down of Loaded Material.
NOTE
Two personnel are required for this task.
(1) Remove winch handle (3) from stowage compartment (1) and install in rear
ratchet lever (2).
(2) Push down on winch handle (3), push spring-loaded pawl (7) forward, and hold
it there.
WARNING
Always wear hand protection when handling winch cable. Never
let cable run through bare hands. Broken and frayed wires can
cause injury.
(3) Unhook winch cable (5) from right ladder bracket (4) and left lashing hook (8).
Pull length of cable (5) from drum (6) needed to tie down load. Release spring-loaded
pawl (7).
TA 094408
2-194
