TM 9-2320-366-10-1
Table 2-5. Preventive Maintenance Checks and Services (M1089) (Cont)
Location
Item
No.
Interval
Item to
Check/
Service
Crewmember
Procedure
Not Fully
Mission Capable
If:
WARNING
• Keep boom clear of all electrical lines and other obstacles while
operating Material Handling Crane (MHC). Failure to comply may
result in serious injury or death to personnel.
• Area must be clear of personnel before rotating or telescoping
boom. Boom must be rotated and telescoped slow enough so
Operator has control of load. If Operator cannot see load during
operation, operate Material Handling Crane (MHC) with REMOTE
CONTROL UNIT. Failure to comply may result in serious injury or
death to personnel.
CAUTION
Keep hook block at least 2 ft (0.61 m) from end of boom. If hook
block hits end of boom, MHC will lose power for several seconds.
Failure to comply may result in damage to equipment.
14
During
MHC
Remote
Controls
(Cont)
f. Move SWING lever to
CW position to move
boom to right.
g. Move SWING lever to
CCW position to move
boom to left.
f. Boom does
not rotate to
right.
g. Boom does
not rotate to
left.
2-176
