TM 9-2320-366-10-1
(9) Release starter pushbutton (7) when engine starts or after 30 seconds.
CAUTION
• STOP indicator illuminates (red) to warn Operator when a potential
engine failure (e.g., low oil pressure, low coolant, coolant overheating,
etc.) has occurred. Shut down engine immediately (para 2-27f) and
perform Engine Troubleshooting (para 3-3). Failure to comply may result
in damage to equipment.
• If OIL PRESS gage does not show engine oil pressure of 15-80 psi (103-
552 kPa) within 10-15 seconds after starting engine, shut down engine
immediately (para 2-27f) and perform Engine Troubleshooting (para 3-3).
Failure to comply may result in damage to equipment.
NOTE
Oil pressure will increase when engine speed increases and will decrease
when engine speed decreases.
(10) Check that OIL PRESS gage (9) reads between 15-80 psi (103-552 kPa). If OIL
PRESS gage reads in red zone and engine oil pressure indicator (10) is illuminated,
shut down engine (para 2-27f) and perform Engine Troubleshooting (para 3-3).
Change 1
2-217
