TM 9-2320-366-10-1
2-27. VEHICLE OPERATION (CONT)
b. Warm Engine Start.
(1) Pull out SYSTEM PARK control (1).
(2) Position master power switch (2) to on.
NOTE
Vehicle serial numbers 0002 through 0017, 0019 through 0025, 0027 through
0031, 0033 through 0038, 0040 and 0041, 0043 through 0053, 0055 through
0089, 0091 through 0254, 0256 through 0258, 0260 and 0261, 0263 through
2400, and 2402 through 3091 are not equipped with LAMP TEST Switch.
(3) Press LAMP TEST switch (3) to verify that high engine temperature (4) and TRANS
OIL TEMP (5) indicators illuminate.
(4) Press down accelerator pedal (6) fully, then release it.
(5) Press down and hold accelerator pedal (6) at approximately 1/3 of travel.
2-220
